The CPAP Pressure Meter is a tool used to measure the pressure of your CPAP, auto CPAP, BiPAP, or bilevel device. This pressure meter is a useful tool to check the performance of your PAP machine and to ensure correct settings.
This product includes: 1 x CPAP Meter
Features:
- Analog pressure gauge – Mechanical dial with a pointer display for quick and clear readings.
- Broad pressure range – Measures CPAP pressure from 0–20 or 0–30 cm H₂O, depending on the model.
- Reliable accuracy – Provides readings within ±2 cm H₂O for consistent pressure verification.
- Fully mechanical operation – No batteries or power required.
Note: This device is for pressure verification only and is not a calibration tool.
CPAP METER
Instructions
Caution: This product is designed as a tool for “spot-checking” CPAP devices. It should not be used to make clinical decisions or change prescribed settings. If you have any doubt about the proper setting or operation of the CPAP unit, call the supplier.
1. Disconnect the patient mask from the patient circuit.
2. Connect the patient circuit directly to the large end of the CPAP Meter.
3. Turn on the CPAP unit. Do not activate any ramp or delay features.
4. Hold the CPAP Meter straight up. Do not block the top of the meter.
5. The line closest to the center of the ball represents the flow being delivered by the CPAP unit.
6. When finished, replace the CPAP Meter in its protective package. Dirt, lint or other contaminants will cause the CPAP Meter to read inaccurately.
Manufacturer: AG Industries Document Reference: LB-1077 (Rev C)
Text Printed on the CPAP Meter
CPAP METER
Hold Upright – Read center of ball
Choose options
